Most people use forced hot air furnaces to heat their homes if they don’t have a heat pump. Furnaces are useful in cold climates as they blow hot or warm air through the ducts and vents of your house. But if your furnace gets damaged, you may find a hard time to determine if you need to replace or repair it.

The cost of furnace installation can vary widely depending on various factors, including the type of furnace, its size, and its energy efficiency. This guide will break down the furnace installation costs and repair costs, explore different furnace types, and delve into factors that affect the price.

Furnace Installation Cost in the Philippines

In the Philippines, the average furnace cost, assuming existing ductwork is in place, is around PHP 81,200. However, this cost can vary depending on several factors, including the type of furnace, its size, and the complexity of the installation. A high-end furnace installation project can cost upwards of PHP 114,800.

It’s essential to keep in mind that labor costs can fluctuate based on your location, so it’s advisable to request quotes from multiple furnace installation companies to get accurate estimates tailored to your needs.

The Importance of a Furnace

Having a reliable central heating system, such as heat pumps, in your home is invaluable, especially during cold seasons. While the initial investment in a new furnace may seem substantial, it can provide comfort and warmth for several years. Whether you’re looking to replace an aging HVAC system or building a new home, investing in a new furnace can enhance your quality of life.

Ductwork Considerations

For homes already equipped with a central heating system, such as a furnace, there’s no need to make significant changes to the existing ductwork when installing a new furnace. However, in the case of new construction or homes with ductless heating systems, you may need to budget extra for installing new ductwork.

Installing a new furnace requires technical expertise, so consulting with multiple HVAC professionals is a wise step to ensure the safety and efficiency of your heating system in the long run.

Different Types of Furnaces and Their Costs

The average cost of installing a new furnace will depend on your chosen fuel source. An electric furnace is more affordable than other furnaces, followed by gas and oil furnaces.

Each of these types of furnaces, aside from various functionality and benefits, has different price ranges as well. Such factors that may affect the price include the brand name and how advanced or high-tech the furnace is.

Electric Furnace

Electric furnaces are an affordable option with a more environmentally friendly fuel source. In the Philippines, a new electric furnace can cost between PHP 58,800 to PHP 106,400, including installation. The price varies based on the furnace’s BTU (British thermal units).

Electric furnaces don’t require gas lines and take up less space than oil- or gas-powered furnaces. They are also safer since they don’t involve fuel combustion. Electric furnaces have a longer lifespan, lasting up to 15 years, although larger homes may experience slightly higher energy bills due to their increased energy consumption.

Natural Gas Furnace

Natural gas furnaces are a popular choice for their quick and efficient heating capabilities, coupled with relatively lower costs. In the Philippines, a new gas-forced air furnace ranges from PHP 58,800 to PHP 115,600, including installation, depending on the furnace’s BTU and AFUE (Annual Fuel Utilization Efficiency). While the upfront cost may be higher compared to electric furnaces, gas furnaces tend to result in lower utility bills over time. They are especially suitable for regions with cold winters. However, keep in mind that gas furnaces may require more extensive ductwork if you’re switching from an electric furnace.

Oil Furnace

Oil furnaces, although less common, are an option for homes where oil is readily available. In the Philippines, a new oil-forced air furnace can cost between PHP 84,000 and PHP 115,600, including installation, depending on the BTU and AFUE. Unlike gas, oil can be purchased in bulk and stored in a tank, reducing monthly utility costs. However, higher oil prices in most parts of the country make this energy source less popular than natural gas or electricity.

The Impact of Furnace Size on Price

Selecting the right furnace size is crucial because larger and more powerful furnaces tend to be more expensive. Furnace size is measured in BTU (British thermal units), and the appropriate BTU for your home depends on its square footage. As a general guideline, you’ll need approximately 40 to 50 BTU per square foot. For a 2,500-square-foot house, a furnace with 100,000 to 125,000 BTU should suffice. However, your region’s climate may influence this requirement, so areas with heavy winter snowfall may need more powerful furnaces.

Furnace Efficiency and Its Cost Implications

Furnaces are also rated for energy efficiency using the Annual Fuel Utilization Efficiency (AFUE) rating, expressed as a percentage. Higher AFUE ratings indicate greater energy efficiency. High-efficiency furnaces typically have an AFUE rating of around 90 to 95 percent, while average furnaces usually operate at around 80 to 85 percent efficiency.

More efficient furnaces are not only environmentally friendly but also help lower long-term energy bills. Although they may have higher upfront costs, many energy-efficient furnaces come with government incentives and rebates, making them a cost-effective choice in the long run.

Labor Costs for Furnace Installation

Labor costs are a significant component of furnace installation costs. In the Philippines, contractors charge an average of PHP 3,640 per hour for furnace installation, and you’ll likely need a team of professionals to complete the job, which can take eight hours or more. The complexity of the installation, such as the need for new ductwork, can increase labor costs.

For instance, installing new ductwork in your home can be an added expense. Additionally, if you’re replacing an old furnace and require removal, expect to pay an extra PHP 14,000 on average.

Replacing a Furnace Unit

If you plan to replace an existing furnace, the furnace replacement cost is lesser as some components like ductwork are already installed. But if you need to replace your electric baseboard heat with a furnace, the new furnace cost will be more expensive as HVAC contractors need to install ductwork, gas lines, etc. The most economical way to replace the heating system of your furnace is by replacing it with the same type of system.

Warranty Considerations

When purchasing a new furnace, be sure to inquire about the manufacturer’s warranty. This warranty ensures that you won’t be responsible for repairs within a specified period after installation. Additionally, many HVAC contracting companies offer the option to purchase an extended warranty, providing coverage for several years of potential repairs.

Final Thoughts

Investing in a new furnace is a significant decision for homeowners in the Philippines, given its impact on comfort and energy efficiency. The cost of furnace installation varies depending on factors such as furnace type, size, and energy efficiency. Always make sure that the furnace you choose will be suitable for your home so you can live comfortably.

When determining your furnace installation budget, don’t overlook labor costs, which can significantly affect the overall expense. Hiring a professional team is essential to ensure the safety and efficiency of your heating system. Additionally, consider the warranty options available to protect your investment and provide peace of mind.

Explore Luxury Living with Brittany Homes

Explore the world of luxury living with Brittany Corporation. Contact us today to discover exceptional real estate opportunities in the Philippines that align with your dreams and aspirations.

Visit our YouTube or LinkedIn to learn more about our Brittany homes. You may also call us to start your journey towards owning a prestigious property.

Suggested Read: Radiant Floor Heating: The Secret to Heated Floors in Luxury Homes

Suggested Read: Pros And Cons of Wood, Gas, And Electric Fireplaces

Suggested Read: Radiant Floor Heating Cost in the Philippines 2023

Suggested Read: Door Installation Cost in the Philippines

Suggested Read: Gas Stations Within Baguio

Building your dream home in the Philippines is an exciting endeavor, but it’s crucial to have a clear understanding of the factors that affect construction costs. From material choices to design preferences, various elements come into play when estimating the cost of building a house.

This guide will help you explore house construction costs in the Philippines, factors influencing these costs, and budgeting strategies to help you embark on your own house construction journey.

House Construction Cost Estimate

Determining the precise house construction cost in the Philippines can be a complex task, as it depends on several variables. However, starting with a general estimate can provide you with a ballpark figure to initiate your planning. Here’s a breakdown of house construction costs based on rough estimates:

Cost per Square Meter

The cost of constructing a house in the Philippines per square foot or meter can vary depending on factors such as location, design, and materials used. As of Q1 2022, the average cost per square meter for residential construction in the Philippines is approximately Php 10,893.16. It’s important to note that you can typically build on 60% to 80% of your lot area, depending on the number of floors and other factors.

Here are some specific estimates for different types of residential construction per square meter based on data from the Philippine Statistics Authority (Q1 2022):

Single House: Php 10,482

Duplex/Quadruplex: Php 8,798

Apartment/Accessories: Php 9,872

Residential Condominium: Php 18,347

Other Residential: Php 9,693

The Construction Cost Handbook Philippines 2020 by Arcadis Philippines Inc. provides a more detailed cost estimate of house building process in the Philippines.

According to this source, terraced houses and average standard homes (one to two bedrooms) may have construction costs ranging from Php 45,201 to Php 53,865 per square meter. High-end detached houses can range from Php 84,348 to Php 142,074 per square meter, including construction materials and services.

House Finish

The finish level you choose for your house significantly impacts construction costs. There are three main types of house finishes:

Rough Finish: Basic essentials, including cement floorings, concrete walls without paint, corrugated roofs, and jalousie windows. Estimated cost: PhP 22,000 to PhP 25,000 per sqm.

Standard/Executive Finish: Enhanced design with ceramic or granite tiles, painted walls, aluminum-framed windows, and cove-style ceilings. Estimated cost: PhP 30,000 to PhP 35,000 per sqm.

High-End Finish: Premium fittings, double-coated granite tiles, accent wall panels, terracotta roof tiles, and customized ceilings with pin lights. Estimated cost: Starting at PhP 42,000 per sqm.

These cost estimates are exclusive of additional features like lighting fixtures, grills, perimeter fences with gates, landscaping, and fees for house design and building permits.

How Much Does It Cost to Build a Simple House in the Philippines?

If you want your own home that will able to accommodate your needs, a simple house can suffice. You will save money on rent, as well as paying for real estate taxes. A simple house has bedrooms, a kitchen, one to two bathrooms, a dining area, a living room, and a garage.

A simple home-building project may cost around Php 25,000 to Php 37,000 per square meter. But if you plan your new house to be a luxury home, like that of Brittany Corporation’s luxury properties, you may need to look into the average costs for the building process. Make sure to have a rough estimate of the construction cost, and set a realistic budget to prevent any financial problems in the long run.

Factors Determining House Construction Costs in the Philippines

Several key factors influence the cost of building a house in the Philippines. To obtain a more accurate estimate, it’s essential to consider these factors when discussing your project with architects and construction engineers:

House Design and Specifications

The final cost largely depends on the design and specifications you choose for your home. Consider factors of the house design fees such as the type of finish, number of bedrooms and bathrooms, number of floors, size, and design type. Detailed plans and design preferences play a critical role in determining construction costs.

Labor Costs

Labor costs in the Philippines range from Php500 to Php800 a day, depending on the laborer’s skill level and experience. Labor construction costs in urban areas such as Metro Manila may be higher because of increased demand and a higher cost of living.

Timetable and Manpower

The construction timetable can affect costs significantly. Rushed projects with shorter deadlines require more manpower, increasing labor expenses. Planning your construction timeline carefully can help control costs.

Also, make sure to choose construction services that are reputable in building residential projects. These won’t cause delays as much as possible as they already have

Location and Terrain

The location of your lot and its terrain can impact construction costs. Lots in lower areas or sloping terrains may require additional materials and labor for leveling and foundation work.

Construction Materials

The materials you select for your home, including roofing, walls, flooring, and fixtures, influence the overall cost. High-quality material costs generally come at a higher price point, while more economical options can help control costs.

Permits, Licenses, and Taxes

Building permits, occupancy permits, and other required licenses affect the total construction cost. A building permit cost depends on the location, size, and scope of the project. Building permit fees cost around Php 10,000 to Php 50,000, or even more. Real Property Taxes and Value-Added Tax should also be considered in the total cost of building your dream house.

Working with a Set Budget for House Construction

If you have a house construction budget in mind, it’s essential to communicate this budget with your architect and construction engineer. They can tailor the plan and design to align with your financial constraints while ensuring your needs are met.

Be open to alternative materials and design options to find a balance between your budget and the desired outcome, like square footage or opting for a prefabricated home.

Using a Home Construction Loan

Many individuals opt for home construction loans from banks or government institutions like Pag-IBIG to fund their projects. These institutions typically require complete house plans and bills of materials before granting loans.

Banks often approve loans covering 70% to 90% of the property’s appraised value. It’s crucial to have your architect and construction engineer present when assessors from the bank visit your construction site to determine land value and construction costs.

Ensuring Quality in Your House Build

While controlling costs is essential, it’s equally vital to prioritize the quality of your construction. Cutting corners on quality can lead to higher long-term maintenance and repair expenses. Ensure that your architect and construction engineer are reputable and provide warranties and prompt after-sales service for any structural defects.

Building on a Strict Budget

For those with tight budgets, building a house is still possible. Innovative designs and efficient use of materials can help you create a functional and comfortable home within budget constraints. Consider exploring classic Filipino architectural styles like the Bahay Kubo, which can be built using indigenous materials like bamboo, nipa, rattan, and coconut lumber.

Buying vs. Building

Deciding whether to buy or build a house depends on various factors, including location, size, and budget. Building a house allows for more customization but may involve unexpected expenses. Buying a house typically involves a fixed payment but offers less customization. Your choice should align with your financial situation and long-term goals.

Build Your Dream Home with Brittany Corporation

Brittany Corporation specializes in crafting exquisite residential communities that epitomize sophistication and elegance. Their commitment to quality, attention to detail, and dedication to creating exceptional living spaces have earned them a distinguished reputation in the real estate industry.

Whether you’re dreaming of a modern masterpiece with panoramic views or a timeless architectural gem, Brittany Corporation’s portfolio of luxury developments has something to offer every discerning homeowner.

To learn more about their prestigious properties and embark on a journey to luxury living, visit Brittany Corporation’s official website, YouTube, or LinkedIn, or contact their dedicated team of experts today.

Suggested Read: Average Construction Cost of Luxury Homes in the Philippines

Suggested Read: How Much Will It Cost To Build A House in the Philippines

Suggested Read: A Guide For Your Dream Home Building

Suggested Read: Cost To Paint A Room in the Philippines

Suggested Read: Build Better, Safer With Technology

Buying a holiday home abroad involves a lot of factors to think about. Sure, you need to consider where it is and what kind of property it is, but you also have to pay attention to the local rules and laws. In some places, they might limit what kind of property a foreign buyer can get. Plus, there are risks that come with owning a home abroad, so having the right insurance can help reduce these risks.

In this guide, we’ll try to cover some important topics about costs, research, and mortgages so you can make a more informed decision when choosing a property.

Follow Your Instincts and Budget

One of the dilemmas in buying a holiday home is whether you choose one where you can enjoy the city life or coastal properties so you can be near nature. This choice boils down to your personal preferences and budget. Some want convenience by living near restaurants and shops in the city, while resorts attract guests and families because of the amenities and activities they provide. Property prices may also vary in these two areas — living in a holiday home in the city may be more expensive than those in the province or coastal area.

Dominic Volek of Henley & Partners recommends homebuyers to check the property’s history for any issues or disputes that may affect its value. He also said that home buyers should get a real estate agent who is knowledgeable in the local market. You may also need to consult with a tax specialist or lawyer to help you navigate any tax implications for your property.

Seek Advice from Experts Who Know the Location

If it’s your first time buying a holiday home, it can be an unfamiliar territory to you. Check the latest trends, and talk to real property insiders and friends who have already experienced this property investment. According to Knight Frank Singapore’s head of sales for residential international project marketing Clarice Lau, Singapore continues to be the top choice among ultra-high-net-worth individuals (UHNWI) in Asia.

But Lewis Cha of List Sotheby’s International Realty Singapore states that Malaysia is the best country in Asia to invest in based on the Global Property Guide (GPG) ratings; next to it are Indonesia, Philippines, and Vietnam. These findings could be attributed that these areas have fewer restrictions on foreigners owning property.

You may think buying a holiday home abroad is smooth sailing, but it’s actually difficult if you don’t know anyone from the area. You may reach out to local real estate agents, holiday cottage agents, or even the local residents in your area. However, if you are planning to get an agent to assist you, make sure that they are locals in the area.

Generate Income for the Long-Term

Consider having rental income on your holiday home, especially if you’re only staying there for some parts of the year. Most prospective buyers of holiday homes make sure they get a return on their investment by renting the property out to holiday-makers through short-stay services like Airbnb. The rental income you derive from this may help you pay mortgage repayments.

However, you may also need to look into the rental income tax that might come with the property. In some countries like India, it impose a lowest tax rate of 5.8% as compared to other countries that impose a 20% to 30% tax.

According to Bjorn Fjelddahl of Odin Properties, if your holiday property is managed well, “your running costs and more can be offset by rental income.” Depending on the location of the property, your holiday cottage may only be in demand for certain times of the year. Thus, it may be difficult to find guests to stay outside of peak season.

As mentioned earlier, a good long-term investment will come in the location of your holiday home. Do extensive research on the location and invest in a good holiday house with a healthy demand from expatriate professionals and even from the local tenants. You may also consider your second property to be put up for a holiday rental as holiday rentals are most in-demand in most areas.

Checking the New Value of the Holiday Homes

Investors buy holiday properties on many factors: rental income and capital appreciation. Other reasons for the increase in house prices include the reputation, history, and quality of the developer.

For home buyers or investors, experts say that they need to check if the holiday home has any restrictions to foreign ownership, taxes involved, and the ease of moving funds when selling the property. In Hong Kong and Singapore, investors do not pay capital gains tax upon disposal of property, while investors in Taiwan need to pay a 35% capital gains tax, one of the world’s highest capital gains taxes.

In financing property overseas, if you’re buying a holiday home as your second property and for your personal use, a standard residential mortgage is ideal. But if you are letting out a property, you need a furnished holiday let mortgage and they are more expensive. There are providers in the property market that can help bring down mortgage costs as the demand for holiday homes becomes increasingly popular.

When estimating the renovation costs of your investment property or second home, homeowners should treat it as if it’s your primary residence. Experts strongly advise doing a thorough inspection to check for any mechanical, electrical, construction, or plumbing issues. It is also highly recommended to check any design-related matters in the kitchen and bathroom.

The repairs in your second home shall be considered in the potential property value versus the purchase price. Make sure that in renovating your holiday house, check the newspapers and search the internet for the prices before talking to a real estate agent, so you know you are paying the right price. It is also ideal to work with a reliable and reputable local architect for faster logistics management.

Safety and Security of Home

One of the considerations when purchasing a holiday home revolves around the level of maintenance required. Experts emphasize the importance of taking into account the local weather conditions, such as hurricanes or heavy snowfall, and their impact on maintaining the property.

You must do your research on maintenance expenses like lawn care, pool upkeep, and snow removal, as well as the availability of housekeeping and caretaker services.

Another significant factor to bear in mind is security. One cannot assume the same level of comfort and security in their holiday home abroad as they would at home. Ensuring protection against theft and fire is paramount, and it’s vital to verify the functionality and updating of security cameras.

Personalize Your Home

Most holiday homeowners ask if can they live in their holiday homes. The answer is yes since it’s theirs to enjoy. It’s important to make your holiday house ome fit your needs.

According to Derek Lim, who works at a luxury furniture store, think about why you have the holiday home. If it’s for hosting family and friends to enjoy holidays, make sure it’s set up for that. For example, get a sofa that can be arranged in different ways, make sure there’s good lighting to make it cozy, and have a well-designed kitchen for cooking.

When you buy furniture for your holiday home, Lim recommends buying from trusted sellers, especially for things that need setup or customer support.

Discover Luxury Living with Brittany Corporation

Brittany Corporation, a prestigious luxury real estate developer with branches in Alabang, Tagaytay, Sta. Rosa, and more, can make your dream a reality. From city vibrancy to coastal serenity, we have diverse properties to match your preferences and budget. Consult with our local experts, explore holiday rental potential, and personalize your holiday home with ease. Experience peace of mind and create lasting memories.

Contact us today and embrace luxury living in paradise. You may also visit our website, YouTube, and LinkedIn for more details.

Suggested Read: Summer Vacation Homes: A Guide To finding Your Dream Luxury Property

Suggested Read: Why Invest in A Luxury Condo as a Vacation Property

Suggested Read: Pros and Cons of a Condo For Summer Vacation

Suggested Read: The Rising Growth of Holiday Homes in 2022

Suggested Read: Holiday Season: Best Time To Sell A House

A new tankless water heater installation cost is usually around Php 108,000 for a complete system. There are different types, sizes, and energy sources for tankless water heaters, such as electric tankless water heaters and gas tankless water heaters, hence the tankless water heater cost also varies greatly.

If you’re looking for an average water heater system, the cost ranges from Php 57,000 to Php 170,000. However, if you’re looking towards more high-end ones, the tankless water heater costs could go as high as Php 225,000.

What is a Tankless Water Heater?

Tankless hot water heaters have been making waves recently in modern homes. Also known as demand-type or instantaneous water heaters, tankless water heaters provide hot water only when needed; unlike a storage tank water heater, which is continuously kept warm.

A tankless water heater system is more energy efficient, which is why most homeowners are keen on having it in their homes. While it seems like something you’d want to add instantly to your next home, you must always consider its cost. Here’s everything you need to know for getting a tankless hot water heater and its installation.

Tankless Water Heater Installation Costs

Depending on the size and type of tankless water heater system you wish to get, the price for its installation will also vary. You should also take note of the additional labor costs, as it is much safer and more efficient to hire a professional to get the job done.

The energy source for the heat exchanger is one of the factors that can determine how expensive your installation cost will be. There are three well-known energy sources for tankless water heater systems: solar, gas, and electricity.

Electric Tankless Water Heater

The cost for the installation of an electric tankless water heater ranges from Php 57,000 to Php 85,000. Being the most affordable option, electric tankless water heaters are the most common type of tankless water heaters found in households.

Electric water heaters are relatively easier to install but take more energy to generate heat – so you’ll have to leave it on for longer. However, electric water heaters do not emit harmful gases, making it safe for both you and our environment.

Gas Tankless Water Heater

The cost for the installation of a gas tankless water heater ranges from Php 74,000 to Php 102,000. As opposed to electric types, gas types heat up much faster. This makes it famous with people who want quick access to warm water in a snap without having to do any preparation.

There are different ways that you can set up your gas tankless water heaters, either by connecting to a shared gas line or by using your own source. Connecting to a municipality’s gas line can be quite a hassle, so most people opt for using their own instead, specifically, propane tankless water heaters.

Both types of gas heaters require a ventilation system, as this process emits carbon dioxide. Between the two, the gas that propane emits is cleaner only by a bit – but still emits a considerable amount of harmful gases to the environment.

Solar Tankless Water Heater

The cost for the installation of a solar tankless water heater ranges from Php 113,000 to Php 340,000. Solar tankless water heaters are the most expensive option out of the three, but for good reason. It takes much more time and effort to install solar types of water heaters, hence the noticeable price increase.

Due to the nature of how solar energy works, there are rare instances where solar energy by itself may not be enough, so back-up sources of either gas or electric ones often come with the installation. However, solar types are eco-friendly and will also reduce your bill in the long run because of its nature as a renewable energy source.

Whole-house vs Single-Point Systems

If you’re still unsure about installing a tankless water heater system in your entire house, you can opt to install a single unit instead. A single-point system installation cost ranges from Php 5,500 to Php 11,000 only. This is significantly lower from the installation cost of whole-houses systems, which ranges from Php 57,000 to Php 170,000 as stated earlier.

You should also consider the size of your home when choosing the system for your tankless water heater. Small apartments usually only have one single-point system installed, while bigger homes have whole-house systems.

However, some homes also opt to have multiple single-point systems instead. Doing this makes it faster to generate heat, as each unit stands alone without having to rely on a bigger system. This also allows you more flexibility, especially if you want to try out a single unit first if tankless water heater systems are for you before you invest in getting them for your entire house.

Pros and Cons of Having a Tankless Water Heater

Every system has its ups and downs, and tankless water heaters are no exception. Between costs and storage management, these heating systems have different benefits and drawbacks.

Pros:

-> Tankless water heater systems do not run out of water. They are directly connected to your main water line, removing the need to have a separate water system solely for warm water.

-> It is a space-saving water heater system, as you do not have to dedicate a large storage space for your heated water.

-> The life of a tankless water heater is much longer, lasting for as long as 20 years.

-> Energy bills become significantly smaller with tankless water heater systems, making it the cheaper option in the long run.

-> Electric and Solar Powered Tankless Water Heater Systems are more environmentally friendly.

Cons:

-> Tankless water heaters rely on an energy source. Regardless of which type it is, if the energy source run out of power, it cannot function by itself.

-> It has an expensive installation cost. Tank water heaters are much cheaper initially as compared to tankless ones.

-> Tankless water heaters also take longer to install. Especially with gas and solar types, the installation process takes a long time.

-> Repairs are harder to perform in tankless water heater systems.

The Best Features for Your Home

Tankless water heaters are worth the investment. Having one installed in your home allows you a quick warm bath without any hassle. Aside from these, there are many other features you can personalize your home with to fit you and your family better.

The best homes start with the best base houses. Having a good foundation allows you to build a safe and happy home for you and your loved ones. If you’re looking to make a new home, you should start looking first at the best luxury homes in the Philippines, Brittany.

Brittany Homes

Brittany is a world-known luxury real estate company famous for housing the most beautiful homes in the Philippines. Found in several places in the country, Brittany excels in delivering only the best luxury homes and condominiums in all of its projects.

With model houses recipient to numerous awards both locally and internationally, quality is assured in all aspects of Brittany. Having both safety and aesthetics guaranteed, Brittany is sure to house the home you’ve been dreaming of. Worth an investment of a lifetime, choose to live a life full of class and comfort here at Brittany.

Suggested Read: Solar Panels in the Philippines: Price and Installation Process

Suggested Read: Choosing The Perfect Water Heater For Your Condo

Suggested Read: Pros & Cons of Wood, Gas, and Electric Fireplaces

Suggested Read: Water Heater Installation Cost

Suggested Read: Sustainability in Glass Houses

Painting your home’s exterior is a fun and efficient way to keep your home lively and homely. For a home with around 2,000 square feet of siding, the average exterior house painting costs approximately Php 170,000.

Depending on the type of siding and size of area to be covered, an exterior painting project can fall in the range of Php 105,000 to Php 250,000. However, if you’re planning to invest in a more high-end paint job, exterior painting costs usually start at around Php 400,000.

Exterior Painting

Exterior house painting is one of the most processes that most incoming homeowners look forward to. Being able to personalize your home in even a simple way such as choosing the color of your home can be exciting to think about.

While it may seem fun to do this paint house exterior and other places of your home by yourself, this is actually a labor-extensive job that you’d want to leave to the experts. Having the work done by professional painters will ensure that fresh coat of exterior acrylic latex paint actually stays on for a good amount of time.

Depending on the area you live in and the exterior painters you hire, their labor costs will also vary. Oftentimes, these hired painters will also be the one to provide the tools that they will be needing for the project. They are usually paid depending on the time spent working, with the average pay being Php 2,200 per hour.

For most cases, more than one contractor is hired to work on your exterior house painting project. On average, the exterior painting of a house is around Php 85 per square foot.

Painting Costs Based on Type of Siding

Siding is the layer you can find on top of your home’s main exterior layer. These serve to protect your exterior from various elements, such as aging and changes in the weather. While they do indeed play a vital role in protecting your home, they can affect the other factors needed to build your home – one being the exterior paint.

Different siding materials adhere to different amounts and types of paint. Your home’s siding material will be one of the main factors that will dictate the cost to paint a house exterior. Especially if your home still has old paint to be removed before applying a new one, the labor costs will definitely be affected.

Metal Siding

Metal siding is one of the most common sidings used in homes due to its easy installation yet remarkable durability and protection from various elements. However, one thing to note about metal siding is being prone to rust.

Before you start on any paint job, you must always inspect the siding for any rust. In the event that rust is found, you will have to either repair the affected area or replace it entirely. This will inevitably increase the labor costs for your exterior paint job.

For an approximate area of 2,000 square feet to be covered, the average cost to paint metal siding is Php 140,000. For other areas and difference in factors, the typical range for the cost in painting metal siding is Php 105,000 to Php 170,000.

Stucco Siding

Stucco is a mixture made up of cement, sand, and water. It is a well-known siding material due to its long-lasting reliability that can last over 50 years when properly maintained. Stucco is also resistant to a number of elements, such as mold, mildew, and rotting.

Painting over stucco can be a tedious job as there are only certain paint types which can adhere to it. It will also need to have some preparation done before you can apply paint to it and will also require multiple layers of paint in order to have a fuller look due to the crevices found in stucco.

For an approximate area of 2,000 square feet to be covered, the average cost to paint wood siding is Php 160,000. For other areas and difference in factors, the typical range for the cost in painting wood siding is Php 113,000 to Php 207,000.

Wood Siding

One of the main reasons why people opt for wood siding is its safety for the environment. Not only is it environmentally friendly, but it also has a unique aesthetic that can be hard to replicate using the other types of materials for siding.

On the flip note, using wood as a material generally makes you quite prone to a number of things. You can’t simply paint over any holes or other damages that have formed on the wood. If it has old paint attached, you will still have to remove the old one and sand it down further. Multiple paint coats must also be done must also be done to ensure a full overall look because of wood’s rough surface.

For an approximate area of 2,000 square feet to be covered, the average cost to paint wood siding is Php 180,000. For other areas and difference in factors, the typical range for the cost in painting wood siding is Php 125,000 to Php 240,000.

Concrete and Masonry Siding

Concrete and Masonry Siding is known for its low maintenance yet still durable performance as a protector of your home. In the case of fiber cement, it is also often used in areas prone to tornadoes and hurricanes due to its resistance to moisture.

However, one of the downfalls of painting over concrete or masonry is the need to apply multiple coats of paint in order to have a good output. Prior to this, you will also have to apply a primer or sealant of some form to ensure that the color you wish to apply will truly pop out and stay that way.

For an approximate area of 2,000 square feet to be covered, the average cost to paint concrete and masonry siding is Php 190,000. For other areas and difference in factors, the typical range for the cost in painting concrete and masonry siding is Php 125,000 to Php 250,000.

Exterior Paint Cost

For the paint itself, these are usually bought in gallons. Depending on the type of paint you get and its quality, the cost for the actual paint itself can also vary greatly. Generally, paint used for exterior house painting falls at around Php 700 per gallon while high quality ones are available for aound Php 4000 per gallon.

An average area of 2,000 square feet usually requires 12 gallons of paint. This corresponds to a total cost of approximately Php 20,000 to Php 48,000 for the average exterior paint job.

Other Factors Which Can Affect Exterior Painting Cost

Aside from simply the siding of your house, you can also opt to have other features of your home get a fresh new paint job as well. However, these features are usually priced much higher due to the difference in shape and complexity.

Here are some of the features often also included in the exterior painting project and their equivalent approximate cost:

=> Doors: Php 2,800 to Php 6,500

=> Gutters and Downspouts: Php 2,800 to Php 5,400

=> Fascia: Php 3,400 to Php 8,800

=> Shutters: Php 6,500 to Php 15,500

Creating a Beautiful and Strong Home

Your home is a reflection of who you are as a person. Investing in your home is one of the most important decisions in your life that you must take. From building the foundation of your home, painting the exterior, and designing the interior of your home, all of them must be done with care.

If it seems like a tedious process, you can always opt for ready-made homes. When it comes for looking the best homes made to portray both strength and beauty, nothing does it better than Brittany.

Brittany Homes

Brittany is known for its luxury homes which are the epitome of class and luxury. Providing its homeowners with only the most beautiful houses in the Philippines, Brittany has projects all over the country to satisfy you and your family.

Guaranteed to excel in both durability and aesthetics, you can’t go wrong with choosing Brittany. Find your perfect home here in the luxury homes and properties of Brittany.

Suggested Read: Spanish-Style Homes: Smart Investment in Today’s Market

Suggested Read: Exquisite Craftsmanship of Spanish Architecture

Suggested Read: Siding Installation Cost: An In-Depth Guide

Suggested Read: Cost to Paint A Room in the Philippines

Suggested Read: Vinyl Siding Installation Cost

Overtime, your home’s bathroom can become worn-out and need a remodeling job. Bathrooms are often remodeled and the cost for it usually around Php 400,000. However, the total range of bathroom remodeling costs starts from Php 114,000 to Php 850,000.

Depending on the size and materials you wish to use for your bathroom, the estimated cost will also vary. The difference between the state of your old bathroom versus the design for your new bathroom will also determine how expensive the job will be. High-end remodeling projects can go as high as Php 1,600,000.

Bathroom Remodel Cost

Just like how houses can have different models and sizes, bathrooms work the same. Based on the size of your bathroom, your bathroom remodel costs will be greatly affected. A bathroom renovation is always worth the price, especially as one of the places in your house that you’ll definitely be using often.

The cost for a bathroom remodel ranges from the stated price above of Php 114,000 to Php 850,000 for master bathrooms. Naturally, the labor costs will be higher for bigger areas and is normally measured by square foot. For smaller bathroom sizes and powder rooms, bathroom remodels only cost a much lower price of Php 57,000 to Php 455,000.

Hiring a professional contractor for your bath remodel will actually help you save money in the long run by investing in quality ang long-lasting work. Bathroom renovation costs might seem daunting at first, but seeing the improvements in both aesthetic and function of the bathroom renovations will assure you that the investment is worth it.

Costs for Different Bathroom Features

Depending on what features you want remodeled and installed in your bathroom, the cost will vary. Light fixtures like a simple upgrade of your bathroom walls or a shower style average cost will have a significantly lower price as compared to heavy ones like a full-on bathroom remodeling job.

Bathtub: The installation cost range for a bathtub is Php 113,000 to Php 260,000.

Cabinets: The installation cost range for cabinets are Php 170,000 to Php 340,000.

Countertops: The installation cost range for countertops are Php 113,000 to Php 284,000.

Flooring: The installation cost range for flooring is Php 85,000 to Php 255,000.

Radiant Floor Heating: The installation cost range for radiant floor heating is Php 57,000 to Php 455,000.

Lighting: The installation cost range for lighting is Php 28,000 to Php 85,000.

Shower: The installation cost range for a shower is Php 57,000 to Php 340,000.

Sink/Faucets: The installation cost range for sinks and faucets are Php 11,000 to Php 85,000.

Toilet: The installation cost range for a toilet is Php 25,000 to Php 88,000.

Fan/Ventilation: The installation cost range for a fan or ventilation is Php 11,000 to Php 28,000.

Plumbing: The installation cost range for plumbing is Php 57,000 to Php 113,000.

Cost of Bathroom Materials

The material you use for your bathroom is one of the most eye-catching elements it has. It can either make or break the aesthetics of your bathroom. You should always consider the type of materials you want to install in your bathroom.

It also serves an important role in the safety of your bathroom, especially for the wet areas of the bathroom floor. Countertops, bathroom walls, and cabinets are also affected by the material that you choose for your bathroom.

Tile

Tiles are the most common and affordable option when it comes to bathrooms. Using a floor tile has been associated with bathrooms for quite a long time now and there is absolutely nothing wrong with going with this option. If you’re on a budget and want to go for a simple design, tiles would be the best option for you.

The installation cost range for tiles is Php 1,700 to Php 4,500 per square foot.

Marble

Marble is considered a simple yet classic option for your bathroom aesthetics. Given its price it allows you a more elegant-looking design for your bathroom. Monochromatic looks for bathrooms often use marble because of its unique pattern that fits well with the theme.

The installation cost range for marble is Php 5,000 to Php 8,000 per square foot.

Quartz

Quartz is another material distinguished for its sophisticated design. Plain quartz especially gives a very clean image, making it a popular choice for bathroom design. It is considered one of the more high-end materials that you can use for your bathroom remodeling needs.

The installation cost range for quartz is Php 5,000 to Php 11,000 per square foot.

Granite

Granite is the material that almost everyone wishes to have in their bathroom. It exudes a feel of class and luxury that will make your bathroom a place of high standard. However, granite is quite expensive, so it not used that often. For those looking to invest in their bathroom aesthetics and have the budget for it, then granite is the way to go.

The installation cost range for granite is Php 5,000 to Php 14,000 per square foot.

Bathroom Remodeling Trends

Of course, your bathroom must have a theme if you wish for it to have a good look. To ensure that your design isn’t all over the place, choosing a theme to begin with will allow you to have a more unified appearance overall.

Here are some of the latest design trends famous not only in bathroom remodeling, but also for your house as a whole:

Traditional

Inspired by 18th century English and Frenc, this look pays attention to detail and focuses on antique decor and fixtures.

Transitional

Similar to traditional but uses softer palettes for a simpler and more modern look. This style often utilizes quartz.

Modern

Minimalist looks are often used for modern homes. It is a simple yet clean way to showcase your home and bathroom. It often uses monochromatic or grayscale palettes.

Contemporary

A bold modern look which incorporates sharp edges and lines. It uses strong colors and contrast to achieve a decorative style.

Farmhouse

This is influenced by the American homes of the 19th century. It exudes the feel of simple and homely lifestyle by using antique furniture.

Craftsman

America in the 20th century often used straight lines partnered with rich hues and wooden features for their homes. Using stained glass and having lantern-inspired fixtures were also a staple.

Industrial

Focusing more on the functional side of things, industrial styles utilize raw metals and wood to give it its unique edgy look.

Asian

One of the things Asia is known for are their remarkable spas. People who want to recreate this relaxing atmosphere do this by utilizing mood lighting and neutral tones through wood.

Beach Style

This style borrows accents from the life on the tropics. It often uses palettes with the colors blue, white, and green in order to replicate that dreamy beach feeling.

Mediterranean

Mediterranean styles often incorporated either bright white and blue color palettes similar to the beach styles yet could also use bronze and tan tones for a more traditional approach.

Choosing the Best for Your Home

Your theme is one of the most important aspects of your home. Extending even further from your bathroom, your theme will greatly determine the overall feel of your home.

Of course, creating a good home starts with the basics – the foundation of the house itself. In order to ensure that your ideal home will actually be executed well, you should get a home that meets all your expectations. When it comes to this, no one can do better than Brittany.

Brittany Homes

Brittany is known for continuously exceeding expectations of homeowners here in the Philippines. More than just a luxury real estate company, Brittany is dedicated to giving our homeowners the luxurious and comfortable lifestyle they deserve.

Home to only the most beautiful houses in the Philippines, we guarantee that your lifestyle will become a hassle-free experience by providing you with only the best homes and services in the country.

Suggested Read: Sustainable House Remodeling Techniques For Your Luxury Home  

Suggested Read: Greatest Return on Investment in Home Remodeling

Suggested Read: Bathroom Remodeling Ideas For Your Luxury Home

Suggested Read:  Kitchen Remodel Cost in the Philippines 2023

Suggested Read:  Quartz Countertops Cost

Foundations of a home are extremely important. The average cost for installing the foundation of your home is Php 415,000. This can vary depending on the type of foundation you wish to build, the materials, the size of your home, as well as the labor costs. Overall, foundation costs usually fall in the range of Php 227,000 to Php 682,000, while those found on the more high-end projects go even beyond Php 1,137,000.

Foundation Installation

Your home’s foundation serves as the core strength of the establishment as a whole. The foundation will greatly influence how your home will turn out, as well as how long it will last against the battle with time and weathering. If you want your home to last for long, you should invest in the correct foundation suitable for your home.

There are different types of foundation available which serve their own purposes. For home foundations, concrete slabs, piers and beams, crawl spaces, and basements are the ones most used. Each one of these variations have their own conditions to be met before they should be installed, hence, thorough research and planning is required in order for you to find the right foundation type for your new home.

The foundation of a home plays a vital role in building your home. It is arguably the most important aspect, so do not take any shortcuts when planning your foundation. Hire a professional to do this work for you to ensure that your home will last for years. With years of experience, they are guaranteed to know what should be done on your home based on the conditions you live in.

Even outside planning, building the foundation itself should also be done by experienced professionals. Making the foundation of your home is a very labor-intensive and dangerous process which requires expertise.

There are many things to be done as well prior to the building process itself, such as acquiring building permits and performing inspections. Hence, it will be much easier for you to contact and work with known companies who offer these services and get the job done for you.

Types of Foundation and their Cost

As mentioned before, there are four types of foundation often used for homes – concrete slab, pier and beam, crawl space, and basements. Even from just the foundation type itself, the foundations costs will already vary.

Concrete slab foundations typically cost the cheapest, while basement foundations cost the most. Pier and beam foundations and crawl space foundations lie somewhere in between in the middle. These foundation variations have their own properties which you should consider before choosing your home’s foundation.

Concrete Slab Foundation

Concrete foundations are the most affordable foundation type available out of the four. These foundations are most often used for places with moderate climates where the soil is not prone to expansion.

This type of foundation works by the concrete material being in direct contact with the land itself, hence, places where moisture and temperature are often fluctuating could easily cause soil to expand and contract – causing a huge problem to the home’s structure.

Other than the concrete itself, these foundations are built with very short metal footings. These are extended onto the land it sits on, but more footing will greatly improve the foundation’s integrity. Rebar and stem wall foundation are often used as further support around the concrete foundation.

The average concrete foundation cost ranges from Php 70 to Php 300 per square foot. It usually costs between Php 227,000 to Php 569,000 in total for an average-sized home.

Pier and Beam Foundation

On the other hand, pier and beam foundations are the ones often used for areas prone to fluctuating moisture and temperature levels. Unlike concrete foundations, pier and beam foundations are able to raise homes slightly higher – making it flexible to soil expansion and other possible water damages from the ground moisture.

Stone or concrete piers are driven to the ground, allowing the beams made of either wood or concrete to hang horizontally. This method also creates a small empty space beneath the home built, one that is often used for plumbing or electrical needs.

Due to the hard labor costs, installation of a pier and beam foundation can be notable higher as compared to concrete foundations.

The average pier and beam foundation cost ranges from Php 230 to Php 455 per square foot. It usually costs between Php 455,000 to Php 850,000 in total for an average-sized home.

Crawl Space Foundation

If pier and beam foundations are not enough to combat the damage from ground moisture, you’re more likely to opt for a crawl space foundation instead. From the name itself, the space underneath the home is much larger than the ones from pier and beam foundations – a space big enough to crawl under.

This option is famous in places which are prone to heavy rainfall, as the house is lifted from the ground even higher. However, the large space is also vulnerable to other problems, such as mold. To prevent this, homeowners are recommended to install moisture-reducing insulation.

The average crawl space foundation cost ranges from Php 300 to Php 570 per square foot. It usually costs between Php 569,000 to Php 1,137,000 in total for an average-sized home.

Basement Foundation

With piers extended to the ground deep enough that the created space can be turned into a living area, basement foundations are the most suitable for areas which very low temperatures. Not only will it provide you with more living space, but it also makes the foundation of your home much stronger.

The cost for a full basement foundation can be daunting, however, it is proven to be a great investment with increasing value overtime. The extra living space is great for home design and extra rooms, though some also opt to have them rented out for extra profit.

The average basement foundation cost ranges from Php 300 to Php 850 per square foot. It usually costs between Php 569,000 to Php 1,706,000 in total for an average-sized home.

Building a Lifelong Home

Your home is the place you will spend most of your life with, so when it comes to building a new one, you should always place extra effort. A home that lasts long symbolizes strength not just in the house itself, but also in the people who made it.

This is why it is important to get in contact with professionals considered experts in their fields when it comes to building your home. In the case of foundations, these experts perform soil analysis and other methods to ensure the best possible foundation for your home.

Alternatively, you can also choose to buy a home which has already been built. When it comes to ready-made model houses with strong foundations, Brittany places first.

Luxury Homes by Brittany

Brittany Corporation is a certified expert when it comes to providing quality luxury homes here in the Philippines. An established luxury real estate company recognized both locally and internationally, Brittany takes pride in the luxury homes and properties it offers.

Working with professionals with years of experience, the homes in Brittany are guaranteed to last long with its brilliant planning and architecture. Using only the top-quality materials around, these homes ensure not just a safe home for you and your family, but also a beautiful and elegant one.

Suggested Read: Concrete Driveway Cost in the Philippines 2023

Suggested Read: Basement Finishing Cost in the Philippines 2023

Suggested Read: Foundation Repair Cost in the Philippines 2023

Suggested Read: Concrete Grades And Where To Use Them

Suggested Read: Concrete Cost in the Philippines 2023

How much does an installation of concrete cost?

When pouring concrete slab, the average costs an average of 200,000 to 700,000 pesos. Making a large-scale or high-end project as an example, the cost estimate would be 2,100 pesos per square foot.

Table of Contents:

1. How much does an installation of concrete cost?

2. What materials make up concrete?

3. What is reinforced concrete?

4. What is a concrete slab?

5. Concrete per cubic yard average cost

6. How much does it cost to pour concrete?

7. Other things that add to concrete cost

Installing concrete is common and known to be used for different construction projects such as retaining walls, building a concrete foundation, walkways or driveways, and the like. It has various uses and can make any structure strong and stable. However, since mixing and installing concrete is quite complicated and crucial, it is important to consult a professional concrete installer to give you a detailed design and layout plan. They will also help you determine the purpose of the concrete structure and its dimensions, and obtain any necessary permits or approvals from local authorities.

What materials make up concrete?

Cement

Cement is a fine powder that acts as the binding component of concrete. The most common type of cement used in concrete is Portland cement, which is made by heating a mixture of limestone, clay, and other materials to high temperatures in a kiln. There are various types of Portland cement (Type I, Type II, Type III), each designed for specific applications and conditions. The choice of the right type of cement and its proper use in construction projects can significantly impact the strength of the concrete and the durability and longevity of structures.

Aggregates

Aggregates are what make a cement. Those are the granular materials that could be sand, gravel, crushed natural stone, or a combination of all. It greatly contributes to the cement’s durability, strength, stability, and density. Aggregates can be categorized into two types:

1. Fine Aggregates

   These are smaller particles, such as sand, and are used to fill the voids between the larger aggregates and cement particles.

2. Coarse Aggregates

   These larger particles, such as gravel or crushed stone, provide the main structural support in concrete.

Water

The chemical reaction between cement and water, known as hydration, causes the mixture to harden and gain strength, resulting in a solid material that can be used in various construction applications. It should not be taken lightly because the water-cement ratio should be critically mixed as it affects the workability, strength, and durability of the concrete.

Reinforcement

Steel bars, wire mesh, or other forms of steel elements are used as reinforcement in reinforced concrete structures. Reinforcement provides tensile strength and helps resist forces that could cause cracking and failure in concrete.

What is reinforced concrete?

Reinforced concrete is a versatile construction material used widely in building and infrastructure projects. It combines two primary components: concrete and reinforcement materials, typically steel, to create a composite material with enhanced structural strength and durability. Concrete is excellent in resisting compression but relatively weak in tension. By adding steel reinforcement, the composite material can withstand both compression and tension forces effectively. The steel reinforcement is strategically placed within the concrete to counteract tensile stresses, while the concrete protects the steel from corrosion and fire.

What is a concrete slab?

Concrete slabs play various roles and serve as the foundation or base for buildings and structures or as stand-alone surfaces in applications like concrete floors, pavements, walkways, patios, and more. They are designed to distribute the weight or load evenly over a given area and provide a stable and durable surface. A basic concrete slab is a flat, horizontal, and typically rectangular structure.

Types of Concrete Slabs:

1. Flat Concrete Slab

   Flat slabs also known as plain concrete slab, is simple and do not have beams or girders. They are directly supported by columns or walls.

2. Slab-on Grade

   This type of concrete slab is poured directly on the prepared soil underneath. It does not have any additional foundation but has a layer of gravel or insulation for moisture control and temperature regulation.

3. One-way and Two-way Slab

   These two types of concrete slabs have beams to support them, the only difference is the number of supports. One-way slab has two beams or walls on opposite sides, which is typically designed to carry loads primarily in one direction. It is commonly applied to structures with long and narrow spaces like the corridors. While two-way slab is supported on all its four sides, which is designed to carry loads in both of the two directions. It is commonly used in columnar layouts like offices.

4. Composite Concrete Slab

   A Composite Slab is a thicker concrete slab combined with a structural steel deck and rubber or wire mesh. This combination enhances load-bearing capacity and can be used in buildings requiring large open spaces such as garages, industrial facilities, and high-rise buildings.

Concrete per cubic yard average cost

Concrete is one of the primary things you need to focus on in your home improvement project. Materials and labor costs are just primary factors to the concrete slab cost, you first need to determine the size of your project to have an estimated cost per cubic yard. Here is how to determine how much concrete you will need in your next landscaping projects.

The formula is this: Multiply the square footage of your area by the depth or height, then divide it by the standard number of cubic feet in a cubic yard which is 27.

Example of concrete cost calculation:

(25 x 25) x 4 = 2,500

2,500 27 = 92.60 cubic yard

This example is for patios which typically need to be about four inches deep. Concrete driveways should be around six inches deep to support the additional weight they will hold. Just a tip, when ordering concrete, it is always a good idea to round up in case you need more because of a mistake along the process. From the example given above, it is advisable to buy 93-94 cubic yards of concrete which would cost 440,000 pesos.

How much does it cost to pour concrete?

Whether your concrete project is for a driveway, a sidewalk, a patio, or any building structure, pouring concrete is the most critical process. It also takes a lot of process before proceeding to the pouring. Proper concrete pouring is essential to ensure the strength, durability, and appearance of the finished product.

Prior to leveling the ground, clearing up the site is important so all debris and obstacles should be removed. Hardscaping or concrete removal will also be required if there is old concrete. It might also be necessary to lay some sand or gravel. Future cracks in the concrete can be avoided with the aid of reinforcements. The mixing process of the concrete must be properly examined and ensure that the water-cement ratio is correct. For driveways and paths, wet concrete is better. As for vertical structures, drier cement is much better. Concrete mixes will then be poured and any patterning will be permanently embedded. This procedure can take a few days or longer, and it frequently calls for the assistance of several contractors. Among all these procedures, it is safe to say that labor cost greatly adds to the concrete cost.

You will have to prepare about 70,000 to 90,000 pesos for all the labor costs.

Find Well-Structured Properties at Brittany Corporation

Discover a wide selection of high-quality and meticulously maintained properties in the beautiful homes of Brittany.

Find well-structured concrete properties of Brittany Corporation as it is recognized as a trailblazer in the creation of luxury residential communities that feature exquisite homes embedded with unique elegance. Meet with our partner concrete contractors as well and have a professional concrete installation.

Suggested Read: Concrete Driveway Cost in the Philippines 2023

Suggested Read: Granite Countertops Cost in the Philippines

Suggested Read: Concrete Grades And Where To Use Them

Suggested Read: Driveway Trends of 2022

Suggested Read: Concrete Patio Cost

How much is the average foundation repair cost?

An average foundation repair typically costs roughly 300,000 pesos. For simple fixes, it can range between 55,000 to 350,000 pesos. And for high-end projects, it can cost up to 600,000 pesos. Factors including the extensive repairs, labor costs, type of work, and location can greatly affect the foundation repair costs. You must also take note that any foundation problems should have an immediate repair because if worse comes to worst, expenses will also rise.

Table of Contents:

1. How much is the average foundation repair cost?

2. What makes a good foundation?

3. What are the types of foundations?

4. What are the types of foundation problems?

5. Factors that affect foundation repair costs

A good structural foundation is fundamental to the safety, stability, and longevity of any building or infrastructure. It plays a vital role in ensuring the safety of occupants, protecting the investment in the property, and maintaining the functionality of the structure over time.

If you notice damage to your home’s foundation, may it be minor cracks or larger cracks, immediately contact the nearest reputable foundation repair professionals to examine, diagnose, and apply the necessary repair method to avoid irreversible consequences. It is better to prevent and spend a few hundred dollars or pesos rather than risk your lives and cause more damage.

We have listed the cost guide and other important knowledge about the structural foundation, so keep reading.

What makes a good foundation?

Site Evaluation

A good foundation does not only depend on the foundation materials but also on the ground where it will be standing. Careful planning is essential in building your home’s foundation. Soil tests and geological studies help determine the type of soil, its bearing capacity, and any potential issues, such as expansive soils or high water tables. This way, professionals will know what type of foundation is needed. The foundation design should be tailored to the specific needs of the structure and the site conditions.

Proper Depth

The foundation should be constructed at the appropriate depth to reach stable soil or bedrock. This depth varies depending on local soil conditions and frost depth, among other factors.

Alignment and Level

The foundation should be precisely aligned and level to ensure the structural integrity of the entire building. Any deviations from the intended position can lead to structural problems.

Drainage system and Waterproof material

What most people do not know is the foundation waterproofing is also vital to protect against moisture problems. Additionally, drainage systems, including weeping tiles or French drains, should be installed to divert water away from the foundation and prevent water-related issues.

What are the types of foundation?

Crawl space foundation

This type of foundation is typically used in areas with moderate to high water tables or to provide access to plumbing and electrical systems. The benefit of this type is it gives insulation and moisture barrier. It elevates the building slightly above the ground, creating a space that can be accessed for foundation repairs and maintenance.

Slab-on-grade foundation

This type of foundation is great for single-story or multi-story buildings with light to moderate loads. The concrete slab foundation is poured directly on the ground leaving no basement or crawl space. A concrete slab foundation is commonly used in areas with high water tables or in regions with warm climates where frost heaving is not a concern.

Basement foundation

Basement foundations involve excavating a significant portion of the ground to create a below-ground level, which can be used for storage or additional living space. This type of concrete foundation gives insulation benefits and protection against extreme weather conditions.

Pier and beam foundation

A pier and beam foundation, from the word itself, consists of a series of piers or columns supporting beams, which in turn support the structure. It provides ventilation and access to utilities beneath the structure.

What are the types of foundation problems?

Sinking foundation

This type of foundation problem sinking or sagging of floors which can also lead to uneven floors or sloped surfaces. Sinking foundation repair cost ranges from 27,500 to 165,000 pesos. The right method to address this issue will also affect the cost of foundation repair. These are the two common methods:

1. Slab jacking

Slab jacking sometimes called mudjacking or foundation jacking is a process where a grout mixture is pumped into the air holes of the foundation to lift it to its original level. This repair method ranges from 25,000 to 70,000 pesos.

2. Underpinning

This method costs higher than the first method because it requires more effort and materials. The process includes excavating the foundation and installing piers to support it. Aside from lifting the foundation back to its level, the piers will also help it to stay in place which is a permanent solution. It is a complex process and quite expensive because each pier costs around 55,000 to 165,000 pesos. All in all, the estimated final price for this repair method is 440,000 or higher.

Foundation cracks

Cracks should always be checked because it may or may not be a bigger problem. Minor cracks can be sealed or waterproofed that can cost up to 40,000 pesos. But if worse comes to worst, some cracks may lead to major problems. The size and appearance of the cracks may signify the main cause. Vertical cracks can be a result of settlement, shrinkage, or structural issues. Horizontal cracks often indicate lateral pressure from soil or water. While diagonal cracks may be caused by a combination of settlement and lateral pressure. So you better get it checked by a professional foundation repair company.

Foundation leaks

Leaks in your house or basement may indicate a problem with the foundation. You should get any leaks fixed and the foundation waterproofed since moisture that is trapped in the ground could damage your entire foundation. The average cost of sealing a foundation can cost up to 330,000 pesos. The cost may be lower if a small area of the foundation only needs to be sealed.

Bowing walls

Bowing or leaning walls can result from lateral pressure, inadequate bracing, or water damage. Walls that are bowing inward indicate severe foundation degradation. Basements are where bent walls are most frequent. Bowing walls are a sign that the soil beneath them is unstable and can be brought on by soil contraction and expansion or by inadequate drainage. You will need to have your foundation strengthened with steel or carbon fiber in order to resolve this problem. Foundation stabilization may cost up to 440,000 pesos.

Conclusion

If you do not want to experience foundation issues, we, at Brittany Corporation, will give you the best assurance of a luxury house and lot. We ensure that your home is constructed on the best foundation imaginable if you want to be guaranteed that you have the most wonderful experience while residing here. Your time spent living in our properties is the finest it can be.

You made the right decision to finish this article because Brittany Corporation is here to sell you the most exquisite homes in the Philippines. Start with Crosswinds Tagaytay, your very personal sanctuary inspired by Switzerland. Choose from luxurious condos in Alpine Villas, The Grand Quartier, and Lausanne at Crosswinds, as well as luxurious lots.

Or, if you’re interested in other luxury residences designed by Brittany, there are two Italian-inspired master-planned communities in Vista Alabang called Portofino Heights and Portofino South. If you’re looking to reside in a quiet, upscale neighborhood close to the bustling metropolis of Metro Manila, both of these areas are accessible.

Suggested Read: Several Factors That Affect The Home Addition Cost

Suggested Read: Basement Finishing Cost in the Philippines 2023

Suggested Read: Concrete Grades And Where To Use Them

Suggested Read: 5 Easy Ways For A Rainproof Home

Suggested Read: Driveway Maintenance Tips

How much is the cost of carpet installation?

Installing carpet ranges from 90,000 pesos and can cost up to more than 300,000 pesos depending on different factors. The cost may depend on the project location, complexity of the job, or the type of the carpet that will be installed. You might want to consult a professional carpet installer to give you an idea of the materials, process, and a better understanding of the things you need to know that will fit your budget and needs. But right now, we are going to help you have an overview about carpet installation cost and factors that you may encounter.

Table of Contents:

1. How much is the cost of carpet installation?

2. What are the different carpet materials and how much does it cost?

3. What are the types of carpet installation and how much does it cost?

4. Other factors that affect the cost for carpet installation

Carpets give off a different feeling in homes. It gives a cozy and soft ambiance that makes a house look so inviting. It also has tons of benefits like an instant soundproofing, allergen control, versatility, and less maintenance. While there are a lot of good things that a carpet brings, you must also take into consideration that proper care and maintenance are needed to keep them looking at its best. Also, to get your desired outcome or preferences, you can ask for a quote from different professional installers. That way, you can get a better understanding of the cost for your specific project.

What are the different carpet materials and how much does it cost?

The type and quality of the carpet you choose will have a significant impact on the cost. When choosing a carpet material, consider factors such as your lifestyle, the room’s traffic, and maintenance requirements. It is also important to choose a reputable carpet manufacturer and installer to ensure the quality of your carpeting. Carpeting comes in various materials, each with its own set of characteristics, advantages, and disadvantages. The choice of carpet material depends on your specific needs, budget, and aesthetic preferences. If you are not sure what to get, you can request carpet samples before having the professional installation. Commonly, carpets cost from 100-400 pesos per square foot. Here are some of the carpet materials:

Nylon Carpet

Nylon material might be the best to those who is afraid to mess their carpets. It is stain resistant and wear resistant. Nylon carpets are suitable for high-traffic areas and are available in a wide range of styles and colors. These carpets are the most lasting made of synthetic fibers and, with proper maintenance, can last 12 to 15 years.

Cut Pile or Loop Pile Carpet

Carpet materials can be combined with different pile styles, such as cut pile (where the loops are cut) and loop pile (where loops are not cut). These carpets are ideal for high-traffic commercial and family spaces as well, such as recreation rooms, because they are often very resilient, simple to clean, and stain-resistant making it safe from water damage. Additionally, the indentations left by footsteps and vacuum marks are not visible on loop pile carpets.

Wool Carpet

The softest carpet fiber you can get is made of wool, a natural, opulent substance that lasts a very long time. Because pure wool carpet is created without any chemicals or additives, it is a great option for anyone who have chemical sensitivities or allergies. It is often more expensive than synthetic options and may require more maintenance but is a preferred choice for upscale and eco-friendly homes.

Olefin (Polypropylene) Carpet

Olefin carpets are resistant to moisture and mildew, making them a good choice for basements and outdoor areas. Although this fiber is extremely stain-resistant, it is also prone to soiling and retaining oils, both of which attract dirt. However, cleaning it is not too difficult; in some instances, bleach can even be used. They are less expensive but may not be as durable as nylon or polyester.

Acrylic Carpet

Acrylic is occasionally advertised as “synthetic wool” because it delivers the feel and appearance of wool at a fraction of the cost and has good protection from static electricity, dampness, mildew, fading, and stains. However, it is a weak material that doesn’t hold up well in locations with a lot of traffic. It can occasionally be combined with wool.

Polyester Carpet

Polyester carpets are known for their softness and vibrant color options. They are also more resistant to stains than some other materials. However, they may not be as durable as nylon, making them better suited for low to moderate traffic areas.

What are the types of carpet installation and how much does it cost?

Carpet installation also has different categories depending on the carpet materials, floor and subfloor conditions, and some specific requirements. The method of installation should match the design of the space and the installers should be keen to the details that require particular considerations, like unique room forms, furniture placement, existing flooring, square footage, boundaries, as well as precise measurements, carpet edges positioning, and gap details. Below are some of the methods of carpet installation:

1. Stretch-In Installation (Wall-to-wall carpet)

The most common carpet installation technique in houses is stretching. The edges of the room are framed by tackless strips of wood, which are nailed (or occasionally cemented) to the floor. A good number of nails are bent inward toward the wall on these strips. In the center of the space, padding is anchored to the floor. The carpet is then fastened to the room’s pegs. The carpet is then tightly stretched across the room by the installer. The excess carpet is trimmed, and the edges are tucked under the baseboards.

2. Double Glue Down Installation

This method is used for carpets with dense, low-profile construction. The carpet is glued to the subfloor and also to a separate cushion or pad, creating a strong bond. Double-glue down installations are often used in commercial settings.

3. Direct Glue Down Installation

In this method, the carpet is glued directly to the subfloor, typically using a strong adhesive. It is commonly used for commercial spaces and can be a more cost-effective option.

Other factors that affect the cost to install carpet

Aside from the the type of carpet materials and the methods or techniques used by the carpet installers, here are some of the additional costs for new carpet installation:

Old Carpet Removal

If you are replacing existing carpet, there may be a cost for removing and disposing of the old carpet and padding. Some installers include this in their services, while others charge separately from the carpet installed.

Floor Preparation

If your subfloor needs repairs, leveling, or any other type of preparation work, this can add to the installation cost. Subfloor preparation costs can vary significantly depending on the condition of the subfloor.

Custom Cuts and Patterns

If your project involves intricate cuts or the creation of custom patterns (such as border designs), there may be additional labor costs associated with the complexity of the installation.

Carpet Padding

Most carpet installations require a separate padding or underlayment, which provides cushioning and helps extend the life of the carpet. The cost of padding can vary depending on its quality and thickness.

Furniture Removal

If you have furniture in the area where the carpet is being installed, you may need to pay for the removal and replacement of the furniture. Some installers provide this service for an additional fee.

Protection and Treatment

Some homeowners opt for stain protection treatments or carpet treatments to enhance the carpet’s resistance to stains and wear. These treatments often come with an additional cost.

Specific Equipment like Carpet Roller

There are specific equipment and right tools used to lay carpet and this may add to the cost to achieve an intricate installation. The specialized tools like tack strip, power stretcher, staple gun, etc. are things that should not be compromised. For example, the carpet roller is a must because it plays a crucial role in ensuring that the carpet is properly secured, the seams are well bonded, and any wrinkles or bubbles are eliminated during installation.

Transform your Homes with New Carpet

Carpets come in a wide range of colors, patterns, and textures, allowing homeowners to choose a style that complements their interior design and personal preferences. With Brittany, we allow our homeowners to unleash their creativity and comfort in their houses. We acknowledge your desire to not just own a property but also an attractive home that reflects your personality and preferences that give you a sense of comfort and belonging anytime you are there.

Find the perfect home here.

Suggested Read: Flooring Trends To Look Out For This 2023

Suggested Read: Professional Carpet Cleaning Cost

Suggested Read: Junk Removal Cost