Heat Pump Installation Costs in the Philippines 2023

You may see heat pumps in most houses for heating and cooling options. But in the Philippines’ tropical climate, heat pumps are commonly used for the homeowner’s air conditioner. If you consider installing a heat pump, you may need to check the average heat pump costs and the heat pump’s efficiency.

Read more to find out about heat pump installation cost and other tips and tricks.

Cost to Install a Heat Pump

How much does Heat Pump Installation Cost?

The average heat pump installation costs around Php 249,799. However, the typical heat pump cost is between Php 200,000 and Php 290,000, and some even cost 375,000 for high-end projects. Take note that the total cost of replacing or installing a heat pump depends on the heat pump system you choose, how complex the installation is, and the labor costs in your area.

What is a heat pump and how does it work?

Air source heat pumps, or mini splits, are the most common and affordable heat pump technology next to geothermal heat pumps. A heat pump is an effective heating and cooling solution for any home or building.

Heat pumps work through outdoor air as either a heat source in winter or a heat sink in summer. The heat pump system provides both heating and cooling solutions and they reduce utility bills by around 20% to 40%.

Heat pumps are best suited for homes with mild climates that don’t require extra heating in the winter. If you live in a place with a cold climate, you may need to install additional heating elements aside from your heat pump.

There are different heating and cooling mechanisms you also need to know:

Cooling System

The cooling system works when the refrigerant carries gas and hot air outside. Then, it is pumped through a coil and condenses into liquid. The warm air will evaporate outside, and the liquid refrigerant pumps back inside your home and pulls out more heat.

Heating System

The heating system works in reverse of the cooling system to heat your home. the outdoor unit pulls warm air in and it is then pumped into your home. The refrigerant is still able to pull in warm air during the winter because it is colder than the cold air outside, and the heat travels from warmer to cooler objects.

Heat Pump Size

Heat pumps are around one to five tons in size. The size heat pump depends on the size of your home and the temperature in your region. A high-efficiency system is the typical size for your home to provide heating and cooling evenly.

If you have a professional contractor who installs your heat pump, they should advise you on which size heat pump to buy. But generally in a mid-size home around 2,000 square feet needs three to four tons of heat pump.

How Much Do Heat Pump Costs Before Installation?

Heat pumps cost from around Php 160,000 to Php 245,000, but it may still cost more or less depending on the product. Factors in the price of a new heat pump are the price, size, brand name, and energy-efficiency rating.

Energy-Efficiency and Sound Ratings

The greater the energy efficiency of a heat pump, the higher its price is likely to be. However, the increased upfront cost may prove to be a worthwhile investment due to the subsequent savings on energy bills. When you’re in the process of comparing different heat pump brands, keep an eye on the SEER (Seasonal Energy Efficiency Ratio) and HSPF (Heating Seasonal Performance Factor) ratings.

A heat pump with higher values for these ratings indicates greater efficiency. You should aim for a minimum SEER rating of around 14, while HSPF ratings typically start at 8 and go higher. Additionally, consider the decibel sound rating and opt for a system with a lower number to ensure it operates quietly. Most heat pumps fall within the range of 40 to 60 decibels in terms of noise level.

What are the Different Types of Heat Pumps?

There are different heat pump types that you can install in your homes. Here are the differences between the various heat pump systems:

Air-Source Heat Pump

Air-source heat pumps are the most common type of heat pumps because they are cheaper, especially when homeowners have existing ductwork installed. They transfer heat from outside air to warm inside your home, and they have an outdoor unit sitting above the ground.

While air-source heat pumps are less expensive, they are not as efficient as other heat pumps because they require more maintenance over time.

Geothermal Heat Pump

Ground Source heat pumps, also known as geothermal heat pumps, is another heat pump type that pulls out heat from the ground or a nearby water source through a system of buried pipes. They use the stable temperature deep in the ground to cool or heat your home. Geothermal heat pump is expensive to install, but it is an efficient heat pump because of the constant temperature they have access to. This also means you can save money on your electricity bills!

Solar Heat Pump

Solar heat pumps are highly efficient as they are powered by solar power. However, homeowners need to install solar panels first before having a heat pump installed.

Hybrid Heat Pump

Hybrid heat pumps are usually installed in regions where regular heat pump isn’t enough to heat or cool a home. A hybrid heat pump is combined with a gas or electric furnace that kicks in when the temperature drops lower than usual for the heat pump to operate. The furnace only runs when it’s really cold outside, making your electric or gas bills more manageable.

Ductless Mini-Split Heat Pump

Another type of heat pump is the ductless mini-split heat pump or simply called ductless heat pumps. Ductless heat pumps are suitable for homes without ductwork during the summer and winter seasons. They are small indoor units in designated zones to outdoor units. This type of heat pump unit is also recommended for homes with fewer conditioning zones and smaller square footage.

Gas-Fired Heat Pump

Gas-Fired Heat Pumps support multiple areas in your home simultaneously. However, they are less efficient than other heat pump units and have higher energy costs. This type of heat pump is best for larger homes.

How Much Are Labor Costs to Install A Heat Pump?

The labor costs for heat pump installation cost around Php 3,700 per hour, so be prepared to pay installation costs aside from the heat pump price itself. If you install a geothermal system, the heat pump installation cost may be more expensive.

If you have an existing ductwork from another HVAC system, this can be used with a new heat pump and it won’t be as expensive. However, if you need a new duct system, expect labor costs to increase. To lessen the costs, you can opt to install a ductless heat pump instead.

DIY Heat Pump Installation vs. Hiring a Professional

Installing a heat pump takes a lot of work, such as land excavation, electric work, or solar panel installation. That’s why it is recommended to hire an HVAC professional rather than doing a DIY Heat Pump Installation.

It’s always best to consult an HVAC professional or licensed technician to handle the work. In fact, you may avail warranties for new heat pumps and installation for these may require professional installation by an HVAC contractor. Discuss rates with the experts so you have an idea of how much you need to spend.

Your Path to Comfort and Efficiency: Explore with Brittany Corporation

If you’re ready to elevate your home and immerse yourself in the ultimate blend of sophistication and comfort, trust the expertise of Brittany Corporation. Explore our luxury house and lot properties for sale in exquisite locations such as Alabang, Tagaytay, Sta. Rosa, and Baguio. Discover a life of opulence and world-class luxury living in your new Brittany home.

Visit our YouTube and LinkedIn for more details. You may also contact us to learn more about our luxury properties.

Suggested Read: Sustainability in Glass Houses: Reducing Energy Costs in the Summer

Suggested Read: Smart Home and Glass House: What It Brings To The Table

Suggested Read: A Guide to Keeping Your Swimming Pool Safe & Clean

Suggested Read: A Guide to Water Features for Luxury Homes

Suggested Read: Septic Tank Pumping Cost